Adding Effects With The My Colors Function - Canon PowerShot SX200 IS User Manual

•
,
•
The width and height ratio of an image that can be changed is fixed at
4:3 (for a vertical image 3:4).
•
The number of recorded pixels in a trimmed image will be smaller than
before trimming.
? Adding Effects with the My Colors
Function
You can change the color of an image and save it as a separate image.
Refer to p. 78 for details on each menu item.
•
If you repeatedly change the color of an image, the quality will gradually
deteriorate and you may not achieve the expected color.
•
The coloration of images changed with this function may vary from those
recorded with the My Colors function (p. 78).
128
, and images cannot be trimmed.
Select [My Colors].
●
Select an image.
●
Select a menu option.
●
●
●
Save as a new image and display.
●
Press the n button, select the 1 tab
and [My Colors], and press the m button.
Press the qr buttons or turn the  dial,
select the image and press the m button.
Press the qr buttons or turn the  dial
to select an option, then press the m
button.
After selecting the menu option, you can
zoom the image by following the
operations in "k Magnifying Images"
(p. 115).
If you press the m button during
magnified display, you can switch to the
original image. Pressing the n button
restores the menu screen.
Perform Steps 4 and 5 on p. 126.