Save The Edited Movie - Canon PowerShot SX200 IS User Manual

* Editing
•
When [Overwrite] in Step 4 is selected, the unedited movie is overwritten
with the edited movie, erasing the original movie.
•
When there is not enough space left on the memory card, only
[Overwrite] can be selected.
•
If the battery is depleted partway through editing, the edited movie clips
may not be saved. When editing movies, you should use a fully charged
battery or the separately sold AC adapter kit (p. 40).
108
Even if you move
point, only the portion from the
nearest to the left will be trimmed
when is selected. Only the portion
from the nearest
trimmed when
The light blue section selected with
be the section of the movie that remains
after editing.
Check the edited movie.
Press the op buttons to select
●
press the m button. The edited movie will
play.
●
To edit the movie again, repeat Step 2.
To cancel editing, press the op buttons,
●
. After pressing the m
and select
button, press the qr buttons or turn the
 dial to select [OK], and press the m
button again.

Save the edited movie.

Press the op buttons to select
●
press the m button.
Press the qr buttons or turn the  dial
●
to select [New File], then press the m
button.
The movie will be saved as a new file.
to a point other than a
to the right will be
is selected.
will
, then
, then