Ae Lock/Exposure Shift - Canon PowerShot SX200 IS User Manual

Image Quality Table
Image Quality
(Recording Pixels/Frame Rate)
1280 x 720 pixels, 30 frames/sec. For shooting high-definition movies.
640 x 480 pixels, 30 frames/sec.
320 x 240 pixels, 30 frames/sec.
Estimated Shooting Time
Image Quality
(Frame Rate)
• Based on Canon's testing standards.
• Maximum clip length is approximately 29 minutes and 59 seconds in
and . Recording also stops when the file size reaches 4 GB.
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.

AE Lock/Exposure Shift

You can set the exposure or change it in 1/3 steps within a range of ±2.
For shooting standard quality movies.
Since the number of the recording pixels is
smaller, the image quality will be lower than with
, but you can record three times the length.
Shooting Time
2 GB
10 min. 53 sec.
23 min. 49 sec.
1 hr. 13 min. 10 sec.
Focus.
Lock the exposure.
Press the o button to lock the exposure.
●
The exposure shift bar appears.
Press the o button again to release the lock.
●
Change the exposure.
While watching the screen, turn the Â
●
dial to adjust the brightness.
Shoot.
Changing the Image Quality
Content
8 GB
43 min. 32 sec.
1 hr. 35 min. 11 sec.
4 hrs. 52 min. 24 sec.
, 1 hour in
105