Rear Bench Seat: Functions - Renault MEGANE E-TECH 100% ELECTRIC 2022 User Manual

REAR BENCH SEAT: functions

1
To fold down the seatback
Ensure that the front seats are far
enough forward.
Before folding down a seat back, lower
the headrests as far as possible.
Before folding down any side rear seat,
fasten the seat belt buckle of the seat
concerned into its corresponding catch.
This will prevent the seat belt becoming
trapped when the seat is returned to its
position for use.
In all cases, check that the seat belts
are operating correctly.
Pull the vane 1 and lower the seat-
back A.
Note: for safety reasons, the seat-
back A is equipped with a retaining
system. You may experience resist-
ance when handling.
To replace the seatback, proceed in
A
the reverse order to removal.
Raise the seatback again until it
reaches the locking joint of the seat-
back. Be careful not to jam the safety
strap between the backrest and the
parcel shelf.
Check the operation of the seat belt.
When moving the rear
seats, ensure that nothing
obstructs the anchorage
points (passenger's arm or
leg, a pet, gravel, cloth, toys, etc.).
When refitting the seat-
back, make sure it is cor-
rectly locked in place.
If seat covers are fitted,
make sure these do not prevent the
seatback latch from locking in.
Make sure that the seat belts are
positioned correctly.
Reposition the headrests.
3.33