Using the phone
18
Call timer
Your handset will automatically
time your outgoing and
incoming calls. The call timer
will display after the first 10
seconds of the call. Once the call
has ended, the total call time
will show on the display
for 3 seconds.
Auto answer
If auto answer is set to On you
can end a call by placing the
handset back in the base. If auto
answer is set to Off, you'll need
to press
to end the call.
Auto answer On is the default
setting, see page 47.
Switching the handset on and off
1. Press and hold
or off.
Making an external call
1. Press
2. When you hear the dial tone, type the number.
When the call begins, the light on the phone's base
will flash.
Preparatory dialling
This lets you type in the number first, to avoid
mistakes before the call is connected. If you do make
a mistake, select
Ending a call
Press
Receiving a call
When you get a call, your phone will ring and the
icon will flash on the display. If you've got a caller
display service, the caller's number will show on the
display. Press
finished talking, press
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
until the handset turns on
.
to delete the last digit.
.
to answer the call. When you've
to hang up.