Loading A Document For Scanning - Canon DR-2080C Startup Startup Manual

Loading a Document for Scanning

Notice
When loading a document for scanning, be careful to remove all paper clips,
staples, etc., from the document. During the scanning process, such objects
can tear the document, cause paper jams and/or damage the scanner.
1.
Set the paper feed select lever and paper side guide adapters according to the
type of document to be scanned. (→ Page 48, 49)
2.
Get ready to perform the scanning operation with the application software that
you are using.
3.
Align the paper side guides with the width of the document that is to be
scanned. If the document is printed on A4 or letter-sized paper, align the
guides with the appropriate paper size mark.
4.
When scanning a multiple-page document, fan the pages, then stagger them as
shown in the illustration so that so that the top edge of the first page is lowest.
(Set the document with the top end at the bottom.)
CAUTION
Be careful when handling documents. It is possible to cut your
hand on the edge of a sheet of paper.
50
Using the Scanner