Table of Contents
Advertisement
11.7 POLE MOUNTING THE SRX906LA BP
The SRX906LA Base Plate can be mounted on top of a standard 35 mm pole when used in conjunction with the VTX PM Pole Mount
Adapter. This pole mount accessory attaches directly to the bottom of the Base Plate using two included thumb screws and enables the
user to safely stack two SRX906LA cabinets at an elevated height, either on top of a compatible SRX900 Series subwoofer or on top of a
tripod pole. Pole-mounted SRX906LA systems should sit 1.9 meters (6.2 ft) off the ground, and are designed to work with the SA preset.
STEPS:
•
Mount the VTX PM to the base of the SRX906LA BP using the two included thumb screws.
1
•
Install the completed assembly on top of a compatible pole accessory at a height of 1.9 meters.
2
Follow instructions in section 11 .4 - Assembling Ground-Stacked Arrays to stack up to two SRX906LA cabinets on top of
•
3
the Base Plate using the angles below.
1
2
48
Rigging Manual
3
Advertisement
Table of Contents
