Base Plate Storage Position; Angle Selection Plate - JBL SRX900 Series Rigging Manual

Rigging Manual
11.2 BASE PLA TE STORAGE POSITION
The angle selection plate can be removed from its normal position and placed in a storage location. The M20 knob is used to secure the
angle selection plate onto the base plate. SRX910LA BP is pictured below, but a storage position is also available on the SRX906LA BP.
11.3 ANGLE SELECTION PLA TE
The base plate angle selection plate includes nine pin positions, allowing for a range of angles from -15 to +5 degrees in 2.5-degree
steps. This facilitates selection of the most appropriate position for establishing the required array down angle. JBL Line Array Calculator
3 software is used to determine the best position and check array safety.
+5° -15°
42