Touch Control Panel - Thermador Masterpiece VCI3B30ZS Use And Care Manual

T O U C H C O N T R O L P A N E L
FILTER DELAY
1 2
 FILTER Clean Filter Reminder
After 40 hours of operation, the FILTER button will illuminate indicating that the fi lter needs to be cleaned. When this
indicator illuminates clean the fi lter as instructed on page 15. After cleaning, press and hold the FILTER button for
3 seconds until it beeps to reset the 40-hour period and to turn the reminder off.
Receive clean fi lter reminder notifi cation through the Home Connect™ app when activated in settings section, as well as
see fi lter saturation status.
 DELAY Delay Shut Off
If the blower is off when the DELAY button is pressed, the blower will turn on to the high speed setting for 10 minutes.
Once time has elapsed, the blower will automatically turn off. If the blower is on when the DELAY button is pressed, the
blower runs for 10 minutes from the time the DELAY button was pressed at the current speed then turns off. During the
10 minute timed period, the DELAY button is illuminated. To interrupt a timed period, press one of the fan speed buttons
or 0 button to turn off.
Ability to choose a different time period and speed than the default setting is possible through the Home Connect™ app
in the settings menu.
 0 Off
Touch '0' once to turn the blower off and reset the control.
 1-4 Fan Speeds
Increases or decreases the blower speeds. The chosen blower speed LED will remain illuminated while in operation.
1 – Low
2 – Medium
3 – Medium/High
4 – High
Remotely control and monitor hood fan speeds through Home Connect™ app. An ability to choose a different speed
other than the default setting is also possible through the Home Connect app in the settings menu.
 AUTO Automatic Mode
When in AUTO mode, the hood automatically turns the blower on, depending on the amount of heat the control senses.
It automatically adjusts every 5 minutes. If the control does not sense a high level of heat, it will turn the blower off.
 LIGHTS LED Light Control
This button controls the LED lighting. The fi rst press turns the lights on. A second press dims the lights. A third press turns
the lights off. 0-100% light slider in Home Connect™ app allows additional control to obtain the perfect level of light.
 CONNECT Home Connect™
This function allows the user to connect the hood with a mobile device. See "With the Home Connect™ feature" on
page 12.
Control tone
To turn OFF/ON the control tone, hold the FILTER and LIGHTS button for 3 seconds.
Control tone can also be turned OFF/ON through the settings section of the Home Connect™ app.
Page 10
0 1 2
3
3 4
AUTO
4
LIGHTS CONNECT
5 6 7