Configurable Features - Pioneer VREC-Z710SH Owner's Manual

Configurable Features

Values
Setting
Setting
Category
Video Clip Length
Video Resolution Sets the image quality of video recording.*1
WDR
（Wide Dynamic
Range）
Exposure
Compensation
G-Sensor
Sensitivity
Sudden Brake
Detection Setting
Video
Recording
Calibration
Unit of
measurement
Mounting Height
Setting
Tailgating
Sensitivity Setting
*
1 Only the video resolution of the main camera can be set. The video resolution of the 2nd camera
(sold separately) cannot be set.
*
2 Only displayed when a 2nd camera (sold separately) is connected.
*
3 Set this properly for correct detection of an approaching vehicle behind.
Details
Sets the recording time for one video recording
video file in video recording.
Sets use of the feature that automatically
adjusts the image in situations where there is a
large difference between light and dark.
Sets the exposure of video recording.
Sets the sensitivity for detecting vibration or
impact. If you set a high value, the sensitivity
will increase.
Sets the sensitivity for detecting sudden
braking.
Sets the adjustment of the shooting range
evenly up/down/left/right for the images of the
separately sold 2nd camera.*3
→
"Correcting the Errors in the Shooting
Range for Detection of an Approaching
Vehicle Behind"
Toggles [cm] and [inch] unit settings.
Sets the height from the ground to the lens on
the 2nd camera (sold separately).*3
Sets the sensitivity of detection of approaching
vehicles behind.
− 38 −
Bold: The factory default setting.
Set value
[1 min]/[3 min]/
[5 min]
[1280 x 720p]/
[1920×1080p]
[ON]/[OFF]
[−1.0]/[−0.7]/
[−0.3]/[0]/[+0.3]/
[+0.7]/[+1.0]
[1] to [6]
[High]/[Low]/
[OFF]
Center
[cm]/[inch]
[cm]:
[50 cm] to [200 cm]
[150 cm]
[inch]:
[20.0 inch] to
[78.5 inch]
[60.0 inch]
[High]/[Low]/
[OFF]
[4]
*2