Scanning Area - Canon imageCLASS MF6540 Reference Manual

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only) 4
Printing and
Scanning
5
Network (MF6595cx/MF6595/
MF6590/MF6540 Only) 6
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index

Scanning area

■
Keep the scanning area clean to avoid dirty copies or faxes to be
sent.
Platen glass
1.
Open the ADF.
2.
Clean the platen glass and the underside of the
ADF with a cloth dampened with water. Then
wipe the area with a soft, dry cloth.
Do not dampen the cloth too much, as this may tear the document
or damage the machine.
Back Previous
3.
Close the ADF.
Be careful not to get your fingers caught.
ADF (Cleaning the ADF Manually)
If your documents have black streaks or appear dirty after copying
them using the ADF, this may be caused by pencil lead rubbing off
the documents and onto the roller. Clean the ADF scanning area,
film, and roller.
1.
Turn off the main power switch and disconnect
the power cord.
TOP
Next
9-8