Error Codes (D1180/D1170/D1150) - Canon imageCLASS D1120 Basic Operation Manual

Error Codes (D1180/D1170/D1150)

Error Codes (D1180/D1170/D1150)

An error code is a four-digit code shown on an ERROR TX REPORT or an RX ERROR REPORT
when an error occurs.
For details on reports, see "Summary of Reports and Lists, " in the e-Manual.
See the table below for individual error codes.
Error Code
0001
0003
0005
12-18
Description
A document may be jammed.
– An attempt was made to send a document of
24 7/8" (630 mm) or longer from the ADF.
– A document takes a long time to send
because it contains too much data.
– A document takes a long time to receive.
– The other fax machine did not respond within
35 seconds.
– The other party may not be using a G3 fax
machine.
Action
Remove the jammed document. (See "Clearing
Jams," on p. 12-2.)
– Divide the document into smaller parts and
send from the platen glass.
– Reduce the scanning resolution before
sending.
– Contact the other party and ask them to
reduce their scanning resolution or divide the
document into smaller parts for sending.
– Send the document again. Contact the other
party and have them check their fax machine.
If you are making an overseas call, add a
pause to the number.
– Check with the other party and send the
document to a G3 fax machine. If the other
party does not have a G3 fax machine, try
sending your document using a transmission
mode the other party's fax machine supports.