Canon imageCLASS D1120 Basic Operation Manual page 154

2
Press [SEND/FAX]/
3
Press [SEND/FAX] repeatedly to
select <FAX>, then press [OK].
F A X
S E L E C T : O K
For the D1150, skip this step.
4
Press [Address Book] repeatedly to
select <NAME SEARCH> or <ADD/TEL
SEARCH>, then press [OK].
N A M E S E A R C H
A D D / T E L
– <NAME SEARCH>: Searches a destination by
name.
– <ADD/TEL SEARCH>: Searches a destination
by fax number.
– If no recipient is registered in the Address
Book, <NOT REGISTERED> is displayed.
5
Use – and
the first letter of the recipient's name or
the first part of the fax number.
– For example, if you want to search for a name
that starts with the letter "C", press
Entries starting with the letter you entered are
displayed if any entries are registered. You can
switch the input mode by pressing
• [:A]: Letter mode
• [:1]: Number mode
Ex.
N A M E S E A R C H
C
[FAX].
S E A R C H
[numeric keys] to enter
(ABC).
[Tone].
: A
6
Press or
recipient.
Ex.
N A M E S E A R C H
C a n o n
– : Displays recipients in alphanumerical
order.
– : Displays recipients in reverse order.
7
When the desired recipient is displayed,
press [OK].
Ex.
N A M E S E A R C H
C a n o n ( s a l e s )
8
Press [Start].
– When you place the documents on the platen
glass, press
size, then press
When scanning is complete, press [OK] to
start sending.
– You can also adjust the following scan
settings as necessary, using the keys on the
operation panel, after specifying the
destination in step 7.
• Density: See "Adjusting Density, " on p. 6-29.
• Image Quality: See "Selecting Image Quality, "
on p. 6-30.
• 2-Sided: See "2-Sided Documents, " on p. 6-
31.
When <TIME OUT> is set to <ON> in <TX
SETTINGS> in <FAX SETTINGS> in <TX/RX
SETTINGS>, and if you have specified the
destination by any other method than using
, [numeric keys] and
starts scanning automatically without pressing
[Start], after the preset time for this setting is
elapsed. (See "Time Out Mode, " on p. 6-41.)
Specifying Destinations
to search for the
: A
: A
or to select the document
[Start] for each document.
–
[Tone], the machine
6-23