16.4
Changing the mapping
Info
The desired engine characteristic can be activated using the combination switch.
The setting most recently selected is activated again when restarting.
Traction control can also be activated in each mapping.
The mapping can also be changed during the ride.
16.5
Adjusting the idle speed
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation when running the engine.
–
Use effective exhaust extraction when starting or running the engine in an enclosed space.
Warning
Danger of accidents The engine may go out spontaneously if the idle speed is set too low.
–
Set the idle speed to the specified value. (Your authorized Husqvarna Motorcycles workshop will be
glad to help.)
Activating STANDARD mapping:
–
Press button
Guideline
Engine speed
The indicator lamp
STANDARD – balanced response
Info
F03762-10
Traction control can be activated additionally
using the TC button
Activating ADVANCED mapping:
–
Press button
Guideline
Engine speed
The indicator lamp
ADVANCED – direct response
Info
F03763-10
Traction control can be activated additionally
using the TC button
TUNING THE ENGINE 16
1
.
< 4,000 rpm
A
lights up.
3
.
2
.
< 4,000 rpm
B
lights up.
3
.
117