Advertisement
Instructions
4. Secure a strap wrench around the fluid cylinder (32)
and a large adjustable wrench on the intake valve
housing (28). Turn the adjustable wrench counter
clockwise to loosen and remove the valve housing
(28) from the fluid cylinder (32) (Fig. 2).
NOTE: After a few turns, the valve housing should
be loose enough to finish loosening it with your
hand to remove this part.
Fig. 2
5. Secure a strap wrench around the fluid cylinder
(32). Use the strap wrench to turn the fluid cylinder
counter-clockwise to loosen and remove it from the
flange (29) (Fig. 3).
NOTE: After a few turns, the fluid cylinder should be
loose enough to finish loosening it with your hand to
remove this part.
Fig. 3
4
6. Using a 10 mm socket wrench, remove the 4 screws
32
28
Fig. 4
Repair and replacement instructions for the Air
Valve are included in a separate repair manual
included with the kit:
•
•
•
•
•
32
•
(43) from the air valve (38) and completely remove
air valve assembly from air cylinder (27). Also
remove the two cover gaskets (25). If you are
replacing these parts, discard gaskets. (Fig. 4).
Air Valve Replacement Kit - 24H848, 24H849,
24H850
Air Valve Repair Kit - 24H798
Air Motor Service Kit - 24J757, 24J758, 24J759
Pilot Valve Kit - 24H749
Air Valve Seal Kit - 24H851
Air Valve End Cap Kit - 24H852
38
43
25
27
3A1494D
Advertisement
