Recording To A Vcr Or Digital Video Recorder - Canon VIXIA HV30 Instruction Manual

- There will be no video or audio output from
the HDMI OUT terminal while there is a video
input connection to the HDV/DV terminal or the
AV/ terminal.
- To output audio dubbed later on a tape
through the HDMI OUT terminal, set [AUDIO
OUT] to [ MIX/VAR.] (
- Audio output from the HDMI OUT terminal will
include both channels (Left/Right on a stereo
recording, Main/Sub on a bilingual recording),
regardless of the [OUTPUT CH] setting.
Recording to a VCR or Digital Video
Recorder
You can copy your recordings by
connecting the camcorder to a VCR or a
digital video device. When recording to a
digital video recorder using the HDV/DV
terminal, you can copy recordings with
virtually no generation loss in video and
sound quality.
Connect the camcorder to the external
device following one of the connection
diagrams shown in the previous section
Connection Diagrams (
Settings for Recording Video Output using the HDV/DV Terminal
Standard of
Video Output
the Recording
Signal
on the Tape
High
HDV
Definition
HDV
Standard
Definition
DV
* To output video in high definition verify that the DV terminal on the external digital device is
compatible with the MPEG2-TS protocol; to output video in standard definition, verify that it is
compatible with the DV standard.
Change the following settings as
41).
necessary before making the
connections. Refer to the corresponding
explanation of each setting in the
(
- [PLAYBACK STD] to select the output video
standard.
- [DV OUTPUT] to select the standard of the
output video when using connection type
Note that the video standard of the recorded
copy depends also on the standards supported
by the external digital device. Refer to the table
below.
- Set [AV/PHONES] to [
connection type
Connecting
Connect the camcorder to a VCR or other
analog device using connection type
or to a DVD recorder or other digital
recording device using connection type
67).
Connection Diagrams (
Standard Supported
by the External
Digital Device*
[
HDV
[
[
DV
[
[
DV
[
Connecting to a TV or VCR
POINTS TO CHECK
PLAY/OUT SETUP menu option list
40).
.
4
as shown in the previous section
,
2
[PLAYBACK STD]
Setting
AUTO] or
[
HDV]
AUTO] or
[
HDV]
AUTO] or [
DV] [
71
( 10)
.
2
AV] when using
,
4
67).
[DV OUTPUT]
Setting
HDV/DV]
DV LOCKED]
HDV/DV] or
DV LOCKED]