Display Setup (Lcd Brightness, Language, Etc.) - Canon VIXIA HV30 Instruction Manual

Display Setup (LCD Brightness, Language, etc.)

DISPLAY SETUP
BRIGHTNESS
Adjust ( ) the brightness of the LCD
display with the joystick.
Changing the brightness of the LCD
display does not affect that of the
viewfinder or the recordings.
MARKERS
[ OFF], [ LEVEL(WHT)],
[ LEVEL(GRY)], [
[ GRID(GRY)]
You can display a grid or a horizontal line
at the center of the screen. The markers
are available in white or gray. Use the
markers as a reference to make sure your
subject is framed correctly (vertically and/
or horizontally).
Using the markers will not affect the
recordings on the tape or memory card.
ASSIST FUNC.
[ OFF], [ ZEBRA(70%)],
[ ZEBRA(100%)], [
You can use the assist functions to make
sure you adjust the focus and exposure
correctly.
[ZEBRA]: A striped pattern (zebra
pattern) will appear over areas of the
picture that are overexposed (too bright).
[ ZEBRA(70%)] is more sensitive
than [ ZEBRA(100%)].
[ PEAKING]: The silhouettes of
objects in the picture will be emphasized
in order to allow you to focus manually
more easily.
the recordings on the tape or memory card.
AUDIO LEVEL
[
TV SCREEN
[
When set to [
on-screen displays will appear also on the
screen of a connected TV or monitor.
GRID(WHT)],
controller.
the camcorder's screen, the same
information will also appear on a
connected TV regardless of the [TV
SCREEN] setting. Turn off the data code
display by repeatedly pressing
* The default value is [
playback modes.
6SEC.DATE
[
PEAKING]
When you start playing back a tape or
when the date of the recording changes,
the date and time will be displayed for 6
seconds.
DATA CODE
[ DATE], [ TIME], [
[
Menu Options Lists
Using the assist functions will not affect
ON], [ OFF]
ON]*, [ OFF]
ON], the camcorder's
You can also use
DISP.
When the the data code is displayed on
ON], [ OFF]
CAMERA DATA]
43
( 61)
on the wireless
.
DISP.
OFF] in the
( 57)
DATE & TIME],