Table of Contents
Advertisement
Error
Error Content
Code
F890
Sending
message when
message is being
sent to AV task
F891
Message couldn't
be sent to AV
task
F893
FROM
falsification
F894
EEPROM
abnormality
F895
Language area
abnormality
F896
No existence
model
F897
Initialize is not
completed
F898
Disagreement of
hardware and
software
F8A0
Message
command is not
appropriate
Note:
An error code will be canceled if a power supply is turned OFF.
*1: CPPM is the copy guard function beforehand written in the disk
for protection of copyrights.
9.4. Last Error Code saved during NO PLAY
Error code
F0BF
6) Cannot playback because physical layer is not recoginizable
F0C0
8) DVD: Cannot playback because it is not DVD Video/Adio/VR
F0C1
9) DVD: Prohibited by the restricted region code
F0C2
A) DVD: PAL restricted playback
F0C3
B) DVD: Parental lock setting prohibits the playback of the entire title
F0C4
C) VCD: Prohibited because it is in PHOTO CD fromat
F0C5
VCD/CD: Prohibited because it is CDROM without CD-DA
Additional error explanation
Sending message to AV task
Begin sending message to AV task
Firm version agreement check for
factory preset setting failure
prevention
Firm version agreement check for
factory preset setting failure
prevention
Initialize completion check for
factory preset setting failure
prevention
Unsuitable combination of AV
DECORDER, SDRAM and FLASH
ROM (firmware)
Begin sending message to AV task
53
Defect 1 Defect 2 Defect 3
FROM
(IC6301)
EEPROM
communication
(IC6351)
FROM
(IC6301)
Error Content
CPU
(IC3001)
Serial
on lone
Advertisement
Table of Contents
