6. The "COMPATIBILITY ADJUSTMENT" should be performed after
the replacement of the DD Cylinder Unit.
NOTE:
In case that you have inserted the FPC HOLDER to the DD Cylinder Unit before inserting the
Flexible card into the FPC HOLDER. Pushing stopper portion of the FPC HOLDER with a small
minus screw driver and so on, remove the FPC HOLDER while payingattention for not to scratch
the DD Cylinder and not to break the Head Chip as shown below.
6.5.6. FLAT CARD CABLE INSTALLATION
When installing the Flat Card Cable on the connector, install the Flat Card Cable with the cable
contacts facing the connector contacts.
Fig. S16
Fig. S17
23