Table of Contents
Advertisement
new one. Perform the Compatibility adjustment after replacingthe DD Cylinder Unit.
1. Remove the Mechanism Unit from Main C.B.A./Chassis by
referring to "Disassembly Procedure".
2. Unlock 2 locking tabs on a side to release the Cylinder Flexible
Card as shown in
CAUTION:
Handle the Cylinder Flexible Card with care. When it damaged,
you should replace it with a new Cylinder Unit.
3. Remove a red Screw (S2) and 2 gold Screws (S3) to remove the
Cylinder Unit shown in
NOTE:
When reassembling, perform the steps in the reverse order, and perform the TAPE
INTERCHANGEABILITY ADJUSTMENT certainly after CYLINDER UNIT REPLACEMENT.
6.5.5. ATTENTION WHEN REPLACING DD CYLINDER
When replacing DD Cylinder Unit, follow below steps.
1. Put the gloves on your hands.
Fig. S11
.
Fig. S11
.
Fig. S11
21
Advertisement
Table of Contents
