ASROCK B660M-HDVP/D5 R2.0 Manual page 29

2.7 M.2_SSD (NGFF) Module Installation Guide (M2_1)
The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA.
B660M-HDVP/D5 R2.0:
The Hyper M.2 Socket (M2_1, Key M) supports type 2242/2260/2280 PCIe Gen4x4 (64 Gb/s)
mode.
H610M-HDVP/D5 R2.0:
The Ultra M.2 Socket (M2_1, Key M) supports type 2242/2260/2280 SATA3 6.0 Gb/s &
PCIe Gen3x4 (32 Gb/s) modes.*
* If M2_1 is occupied by a SATA-type M.2 device, SATA3_0 will be disabled.
Installing the M.2_SSD (NGFF) Module
C B
No.
Nut Location
PCB Length
Module Type
26
3
2
1
A
1 2
A B
4.2cm 6cm
Type2242 Type2260
Step 1
Prepare a M.2_SSD (NGFF) module
and the screw.
Step 2
Depending on the PCB type and
length of your M.2_SSD (NGFF)
module, find the corresponding nut
location to be used.
3
C
8cm
Type 2280