Toshiba RAV-SM182UTP-UL Owner's Manual page 9

■
Running operation
* Some operation modes are not available depending on the type of indoor unit.
■
Changing the fan speed
* The available fan speeds vary depending on the indoor unit connected.
15-EN
OM_1115350256-1_EN_FR_ES.indb 8 OM_1115350256-1_EN_FR_ES.indb 8
1
Push the [ ON/OFF] button to start running.
2
Push the " Mode" [ F1] button to
Mode
select the operation mode.
The operation mode changes as follows each time
the button is pushed.
Auto Heat Dry Cool Fan
3
Push the [ ON/OFF] button to stop running.
1
Push the " Fan speed" [ F2] button
Fan speed
to select the fan speed.
The fan speed changes as follows each time the
button is pushed.
Auto High Med Low
When the remote control is used in combination with
an indoor unit that supports 5 speeds, each
push of the " Fan speed" [ F2] button
Fan speed
changes the fan speed display.
Med +
Auto High
Low +
Low Med
" " appears on the display when the connected
indoor unit is not equipped with the fan speed.
" " is not available when "Fan" is selected as the
operation mode.
■
Changing the temperature
▼ When dual automatic mode
In dual set point setting, the temperature set point of individual cooling and heating can be set to adjust the
indoor temperature.
Thermo.OFF for temperature range between the temperature set points for cooling and heating.
If you wish to use the dual automatic mode, ask your dealer to set the setting.
12:00
Room A
F
75
68 F
Auto
Mode Fan Speed
12:00
Room A
F
82
Cool
72 F
Heat
Return Fix
Cool Heat
12:00
Room A
82 F
Cool
F
72
Heat
Return Fix
Cool Heat
NOTE
When connecting to an air conditioning control system which does not support dual set point
• The temperature set point, a value half the heating temperature and Cooling temperature set point will be
displayed.
• When temperature setting has been changed by the unsupported controller, the cooling temperature set point and
heating temperature set point displayed on the dual set point screen will be set automatically.
• For details, contact the dealer where you purchased the air conditioner.
– 8 –
1
∧ ∨
Push the [ ] / [ ] button to adjust the
temperature.
∧
Push the [ ] button to raise the temperature
∨
setting, push the [ ] button to lower it.
• Refer to "Set temp. range limit" for the temperature
range available.
• The temperature cannot be adjusted when "Fan" is
selected as the operation mode.
1
Push the [ ∧ ] / [ ∨ ] button to switch to
the display shown on the left.
2
To set the cooling temperature set point, push
∧
[Cool] and adjust the setting with [ ] /
∨
[ ].
A box will surround [ Cool] and [Temperature set
point]. To set the heating temperature set point,
push [Heat] and adjust the setting with
[ ∧ ] / [ ∨ ].
A box will surround [ Heat] and
[Temperature set point].
Push [ MENU] to confi rm the settings and return
to the normal display.
Push [ CANCEL] to cancel the settings and
return to the normal display.
5/4/2565 BE 09:52 5/4/2565 BE 09:52
EN
TH
ID
16-EN