Individual Louver - Toshiba RAV-SM182UTP-UL Owner's Manual

To stop the louver swing
* When the louver is swinging,
" Swing OFF" is displayed.
NOTE
• "No function" appears on the display for the models not equipped with the Wind direction setting.
• Refer to "14. Information Group control".
• " " appears on the display when the Louver lock function is used.

4-2. Individual louver

■
Individual louver
* For 4-way cassette types, the wind direction and swing operation of each louver can be set individually.
Individual louver
3
4 2
1
Return Louver
Louver No. Swing ON
23-EN
OM_1115350256-1_EN_FR_ES.indb 12 OM_1115350256-1_EN_FR_ES.indb 12
1
Push the " Swing OFF" [ F2] button
on the "Wind direction" screen.
Push the " Swing OFF" [ F2] button
to stop swinging. The louver stops in the position
where the button is pushed.
• The louver does not stop in the position (4) or (5)
when the operation mode is "Cool" or "Dry".
The louver stops in the position (3) even if the button
is pushed when the louver is in the position (4) or (5)
Display when the louver swing is stopped
Fan, Heat Cool, Dry
∧ ∨
• Pushing [ ] / [ ] while the display
when the louver swing is stopped appears on the
screen sets the louver in the position (1).
2
Push the [ CANCEL] button.
The screen returns to the menu screen.
1
∧ ∨
Push the [ ] / [ ] button to select
"5-2. Individual louver" on the menu screen,
push the " Set" [ F2] button.
Set
2
Push the " Louver No." [ F1] button to
select the louver to set.
The display changes as follows each time the button
is pushed.
Louver 1 Louver 2 Louver 3 Louver 4 All
Electrical control
box
Refrigerant pipe
Drain pipe
■
Turning on/off the louver swing
To swing the louver
* When the louver is stopped,
" Swing ON" is displayed.
Swing ON
To stop the louver swing
* When the louver is swinging,
" Swing OFF" is displayed.
NOTE
• "No function" appears on the display for the models not equipped with the Individual louver setting.
• Pushing [ ∧ ] / [ ∨ ] while the louver is swinging stops swinging and sets the louver in the position (1).
• Refer to "14. Information Group control".
• " " appears on the display when the Louver lock function is used. Individual louver setting is not available for the
louver set to be locked.
– 12 –
3
∧ ∨
Push the [ ] / [ ] button to select
the wind direction.
Refer to "Wind direction" about how to set the wind
direction. (page 16)
4
Push the [ CANCEL] button.
The screen returns to the menu screen.
1
Push the " Swing ON Swing ON" [ F2] button on
the "Individual louver" screen.
2
Push the [ CANCEL] button.
The screen returns to the menu screen.
1
Push the " Swing OFF" [ F2] button
on the "Individual louver" screen.
2
Push the [ CANCEL] button.
The screen returns to the menu screen.
5/4/2565 BE 09:52 5/4/2565 BE 09:52
EN
TH
ID
24-EN