Features And Controls - Briggs & Stratton R020833 Operator's Manual

Features and Controls

Read the Operator's Manual and safety rules before operating your electric pressure washer.
Compare the illustrations with your electric pressure washer to familiarize yourself with the locations of various
controls and adjustments. Save this original manual for future reference.
A
B
C
D
E
F
G
H
A - Spray Wand — Allows you to switch between different
nozzles.
B - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
C - Water Supply Inlet — Connect to water supply using
a 50 ft. (15.24 m) maximum garden hose.
D - Detergent Tank — Use to hold up to 40 fl. oz. (1.2 l) of
pressure washer safe detergent.
E - 7-in-1 Nozzle — Contains seven different spray
pattern nozzles for various applications.
F - Identification Label — Provides model and serial
number of pressure washer. Please have these readily
available if calling for assistance.
G - Master ON/OFF Switch — Turn switch to ON (I)
position to start pressure washer. Turn switch to OFF (0)
position to stop pressure washer.
H - High Pressure Hose — Connect red end to high
pressure water outlet and black end to spray gun.
J - Electric Cord with GFCI — The electric pressure
washer and operator is protected by a ground fault circuit
interrupter (GFCI).
K - High Pressure Outlet — Connection for high pressure
hose.
L - High Pressure Nozzle — Gives you the most cleaning
power by producing the highest pressure.
M -Turbo Nozzle (if equipped) — Whirls a powerful pin-
point jet of water for intense cleaning.
N - Warning Label — Identifies hazards to be avoided
when using your pressure washer.
N
M
L
K
J
7