Convection Heating Element Removal - Miele H350 Technical Information

Novotronic Models
Technical Information
5.24 Convection Heating Element - Removal
1. Perform door removal procedure
2. Perform oven removal
3. Perform rear panel removal
4. Perform shelf runner removal
5. Perform enamel rear panel removal
6. Remove the convection heating element retaining screw from the
oven cavity
7. Disconnect the electrical connections from the fan element at the rear
8. Remove the insulation strips
9. Remove the element
Figure 5-22: Convection Heating Element and Fan
47