Download Print this page

MSI MAG B460 TOMAHAWK Quick Start Manual page 49

Hide thumbs Also See for MAG B460 TOMAHAWK:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
▶ GT Ratio [Auto]
Sets the integrated graphics ratio. The valid value range depends on the installed
CPU.
▶ Adjusted GT Frequency
Shows the adjusted integrated graphics frequency. Read-only.
▶ Extreme Memory Profile (XMP) [Disabled]
XMP (Extreme Memory Profile) is the overclocking technology by memory module.
Please enable XMP or select a profile of memory module for overclocking the
memory. This item will be available when the memory modules that support XMP is
installed.
▶ Memory Try It ! [Disabled]
It can improve memory compatibility or performance by choosing optimized memory
preset.
▶ DRAM Timing Mode [Link]
Selects the memory timing mode.
[Link]
[UnLink]
▶ Advanced DRAM Configuration
Press Enter to enter the sub-menu. User can set the memory timing for each/ all
memory channel. The system may become unstable or unbootable after changing
memory timing. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data, and
enter the BIOS to load the default settings.)
▶ Memory Fast Boot [Auto] *
Enables or disables the initiation and training for memory every booting.
[Auto]
[Enabled]
[Disabled]
[Training]
▶ DigitALL Power sub-menu
Press Enter to enter the sub-menu. In the sub-menu, you can setup some protecting
conditions about voltage/ current/ temputure for CPU.
▶ CPU Core Voltage Monitor [VCC Sense]
Selects the monitor source of CPU Core voltage.
▶ CPU Voltages control [Auto]
These options allow you to set the voltages related to CPU. If set to Auto, BIOS will set
these voltages automatically or you can set it manually.
Downloaded from
ManualsNet.com
Allows user to configure the DRAM timing for all memory channel.
Allows user to configure the DRAM timing for respective memory
channel.
The setting will be configured automatically by BIOS.
System will completely keep the archives of first intiation and training
for memory. And then the memory will not be initialed and trained when
booting to accelerate the system booting time.
The memory will be initialed and trained every booting.
The memory will be trained every booting.
search engine
39
UEFI BIOS

Advertisement

loading