File System Format - HP Compaq dx2200 MT Quick Setup Manual

Getting Started
3. Select the All Programs menu.
4. Click on the Windows Update link at the top of the menu.
You will be directed to the Microsoft Windows Update Web
site.
5. You may see one or more pop-up windows that ask you to
install programs from
install the programs.
6. Click the Scan for Updates link when it appears.
7. After scanning, click the Critical Updates and Service
Packs link when it is displayed under the heading Pick
updates to install. A list of updates will be displayed with all
updates selected by default. It is recommended that you
install all of the updates listed in this section.
8. Click on the Review and Install Updates link.
9. Click the Install Now button. This will start downloading the
critical updates and automatically install them.
10. After the updates have been installed, Windows XP
Professional/Home will prompt you to reboot the computer.
Be sure to save any files or documents that you may have
open before rebooting. Then select Yes to reboot the
computer.

File System Format

✎
Depending on your system, you may be prompted to select a file
system format during the initial setup of your system.
Hard drives can be configured in two basic formats: FAT32 (for
HDD partitions no more than 32 GB) or NTFS (for HDD
partitions up to and greater than 32 GB), with variances of each,
depending on the operating system and hard drive support. To
2-2
http://www.microsoft.com
www.hp.com
. Click Yes to
Quick Setup & Getting Started