Assigning A Name To A Java Card; Setting Power-On Authentication - HP Compaq dc7900 USDT User Manual

Assigning a name to a Java Card

You must assign a name to a Java Card before it can be used for power-on authentication.
To assign a name to a Java Card:
1. Select Start > All Programs > HP ProtectTools Security Manager for Administrators in
Windows Vista or HP ProtectTools Security Manager in Windows XP.
2. In the left pane, click Java Card Security, and then click Advanced.
3. Insert the Java Card into the card reader.
NOTE:
to type a new name and PIN.
4. In the right pane, under Display name, click Change.
5. Type a name for the Java Card in the Name box.
6. Type the current Java Card PIN in the PIN box.
7. Click OK.

Setting power-on authentication

When enabled, power-on authentication requires you to use a Java Card to start the computer.
The process of enabling Java Card power-on authentication involves the following steps:
1. Enable Java Card power-on authentication support in BIOS Configuration or Computer Setup.
2. Enable Java Card power-on authentication in Java Card Security.
3. Create and enable the administrator Java Card.
64 Chapter 7 Java Card Security for HP ProtectTools
If you have not assigned a PIN to this card, the New Card dialog box opens, allowing you
ENWW