JVC KD-R601 Instructions Manual page 29

Category Menu items
MENU COLOR
Menu color
RING COLOR *
Ring color
FADER * *
10, 11
Fader
BALANCE *
11
Balance
LOUD
Loudness
VOL ADJUST
Volume adjust
L/O MODE
Line output mode
SUB.W FREQ *
Subwoofer cutoff
frequency
SUB.W LEVEL *
Subwoofer level
*
9 Displayed only when Bluetooth adapter, KS-BTA200 is connected.
* 10 If you are using a two-speaker system, set the fader level to "00."
* 11 This adjustment will not affect the subwoofer output.
* 12 Displayed only when "L/O MODE" is set to "SUB.W."
Selectable settings, [reference page]
• ON
• OFF
9
• ON
• OFF
R06 – F06
L06 – R06
• LOUD ON
• LOUD OFF
VOL ADJ –05 —
VOL ADJ +05
(Initial: VOL ADJ
00)
• SUB.W
• REAR
12 • LOW
• MID
• HIGH
12 SUB.W 00
— SUB.W 08
: Changes the display and button (except EQ/
illumination during menu, list search and playback mode
operations.
: Cancels.
: When a call comes in, the display will flash in blue.
• The display will change to the original color when you
answer the call or the incoming call stops.
When the unit receive a text message, the display only
illuminate in blue.
: Cancels.
: Adjust the front and rear speaker output balance.
(Initial: 00)
: Adjust the left and right speaker output balance.
(Initial: 00)
: Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
: Cancels.
: Preset the volume adjustment level of each source
(except FM), compared to the FM volume level. The
volume level will automatically increase or decrease
when you change the source.
• Before making an adjustment, select the source you
want to adjust.
• "VOL ADJ FIX" appears on the display if "FM" is selected
as the source.
: Select if the REAR LINE OUT terminals are used for
connecting a subwoofer (through an external amplifier).
: Select if the REAR LINE OUT terminals are used for
connecting the speakers (through an external amplifier).
: Frequencies lower than 72 Hz are sent to the subwoofer.
: Frequencies lower than 111 Hz are sent to the subwoofer.
: Frequencies lower than 157 Hz are sent to the subwoofer.
: Adjust the subwoofer output level.
(Initial: SUB.W 04)
0
/ )
Continued on the next page
SETTINGS 29