Microwave - Siemens CM676G0.6 User Manual And Installation Instructions

Table of Contents

Advertisement

en Microwave
To continue without setting a cooking time, press
​ ⁠ .
When the food is ready, press
appliance off.
Changing the cooking time
You can change the cooking time at any time.
1.
Press
​ ⁠ .
2.
Use the rotary selector to change the cooking time.
3.
Then press
​ ⁠ twice.
Cancelling the cooking time
You can cancel the cooking operation time at any time.
1.
Press
​ ⁠ .
2.
Use the rotary selector to reset the cooking time to
zero.
3.
To continue without setting a cooking time, press
​ ⁠ .
The type of heating and temperature settings are
shown in the display.
10.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ In order to achieve good cooking results, do not
delay the end time once the appliance is operating.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡ The type of heating and a temperature or setting
have been set.
¡ A cooking time is set.
1.
Press
​ ⁠ .
2.
Press
​ ⁠ .
11  Microwave
You can use the microwave to cook, heat up, bake or
defrost food very quickly. The microwave can be used
on its own or in combination with a type of heating.
11.1 Cookware and accessories with

microwave

To heat food evenly and avoid damaging your appli-
ance, it is important to only use the right cookware and
accessories.
Follow the cookware manufacturer's instructions.
Unless otherwise specified, place the cookware and
accessory on level 1.
16
3.
To set a later end time, turn the rotary selector.
4.
Press
​ ⁠ to switch the
a The status bar shows a notification when the opera-
tion starts. The appliance is in standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down in the status bar.
a Once the cooking time has elapsed, an audible sig-
nal sounds. A notification appears in the status bar.
5.
Once the cooking time has elapsed:
Cancelling the end time
The set end time can only be changed when the oven
is in standby mode.
1.
Press
a The time-setting options menu opens.
2.
Press
3.
Use the rotary selector to reset the end time to zero.
a The appliance starts to heat and the time starts to
count down.
Changing the end time
The set end time can only be changed when the oven
is in standby mode
1.
Press
a The time-setting options menu opens.
2.
Press " ​ ⁠ end".
3.
Turn the rotary selector to change the end time.
4.
Press
Microwave-safe
Cookware and ac-
cessories
Cookware made
from heat-resistant,
microwave-safe ma-
terial:
¡ Glass
¡ Glass ceramic
¡ Porcelain
¡ Temperature-res-
¡ Fully glazed
​ ⁠ to start the operation.
Press
​ ⁠ to silence the audible signal manually.
To set another cooking time, press
the rotary selector to set the cooking time.
To continue without setting a cooking time, press
​ ⁠ .
When the food is ready, press
appliance off.
​ ⁠ .
​ ⁠ .
​ ⁠ .
​ ⁠ to resume operation.
Information
These materials allow mi-
crowaves to pass through and
are not damaged.
istant plastic
ceramic without
cracks
​ ⁠ and use
​ ⁠ to switch the

Advertisement

Table of Contents
loading

Table of Contents