Table of Contents
Advertisement
en Dishes
Changing the timer
You can change the timer at any time.
Press the
button.
1.
Press "Pause".
2.
Change the timer.
3.
Press "Start".
4.
11 Dishes
The "Dishes" operating mode helps you to use your ap-
pliance to prepare different meals by selecting the op-
timum settings automatically.
11.1 Cookware for dishes
The cooking result depends on the composition of the
meat and the size of cookware.
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C. Glass or
glass ceramic cookware is best. The joint should cover
approx. 2/3 of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
¡ Plastic or plastic handles
11.2 Setting options for the dishes
To cook the dishes perfectly, the appliance uses differ-
ent settings depending on the dish.
The display shows you the settings that are used. You
can adjust certain settings. Follow the instructions on
the display.
Note: The cooking result depends on the quality and
composition of the food. Use fresh and, ideally, chilled
food. Use frozen food straight from the freezer.
Tips and information about the settings
If you set a dish, the display shows relevant information
for this dish, e.g.:
¡ Suitable shelf position
¡ Suitable accessory or cookware
¡ Added liquid
¡ Time for turning or stirring
When this time is reached, a signal sounds.
To call up the information, press . Some notes are
displayed automatically.
Programmes
The ideal type of heating, temperature and cooking
time are preset for programmes.
12 Favourites
In the "Favourites", you can save your settings and use
these again.
Note: Depending on the appliance type, you must first
download this function to your appliance. You can find
more information in the Home Connect app.
14
Cancelling the timer
You can cancel the timer at any time.
Press the
button.
1.
Reset the timer using
2.
Press "Start".
3.
To achieve an optimal cooking result, you must also
set the weight, thickness or the cooking level. You can
set the weight only in the intended range.
Unless otherwise indicated, set the total weight for your
dish.
11.3 Setting a dish
Requirement: The dish is in the cooking compartment.
Press "Dishes".
1.
Press the required category.
2.
Press the required food.
3.
Press the required dish.
4.
Tip: For some dishes, you can select a preferred
cooking method.
→ "Setting options for the dishes", Page 14
a The settings for the dish appear on the display.
Adjust the settings if required.
5.
You can adjust only certain settings depending on
the dish.
→ "Setting options for the dishes", Page 14
For information about the accessory and shelf posi-
6.
tion, for example, press .
Use
to start the operation.
7.
a The appliance starts to heat and the time counts
down.
a Once the dish is ready, a signal sounds. The appli-
ance stops heating.
Once the cooking time has elapsed:
8.
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
11.4 Automatic switch-off function
The automatic switch-off function
lows you to bake and fry without any stress.
When the operation has finished, the appliance auto-
matically stops heating.
To achieve an optimal cooking result, remove your dish
from the cooking compartment once the operation has
finished.
12.1 Saving favourites
You can save up to 10 different operating modes as
your favourites.
To save an operating mode as a favourite, you must
▶
use the Home Connect app. If your appliance is
connected, follow the instructions in the app.
.
to switch the ap-
for the dishes al-
Advertisement
Table of Contents
