Rinnai Granada 252 Operation & Installation Manual page 8

GENERAL INFORMATION
A dedicated 240V earthed 10 Amp power point MUST BE USED with this appliance.
DO NOT use power boards or double adaptors to operate this appliance. The heater MUST NOT be located
below a power socket-outlet.
DO NOT unplug the heater while it is in operation or while the fan is still cycling.
DO NOT place containers of liquid on top of the heater. Water spillage can cause extensive damage to the
appliance and create an electrocution hazard.
DO NOT operate / install this heater in areas where painting is taking place, or in places such as hairdressing
salons, where there may be fluff and dust, and where aerosols are used.
DO NOT connect to an LPG gas cylinder indoors.
Turn the heater 'OFF' after use.
DO NOT remove the Wire Dress Guard. The dress guard is fitted to this appliance to reduce the risk of fire
or injury from burns and no part of it should be permanently removed. For protection of children or the infirm, a
secondary guard is recommended.
Heat emanating from the front of the appliance may over time affect the appearance of some materials used for
flooring such as carpet, vinyl, cork or timber. This affect may be amplified if the air in the room contains cooking
vapours or cigarette smoke. To avoid this possibility, it is recommended that a mat be placed in front of the
appliance, extending at least 750 mm in front of the heater.
When the heater is operated for the first time or after long periods of non use a slight odour may be emitted, this
is normal. However if odours persist switch 'OFF' the appliance and contact Rinnai.
DO NOT place or store the appliance in a tilted position.
Rinnai 8 GRANADA 252 - REH-252UCH2 - OIM