Power Management - HP Compaq d228 MT Supplementary Manual

Computer Setup (Continued)
Heading

Power Management

Setup
✎
Support for Computer Setup options may vary depending on your specific hardware
configuration.
Computer Setup Utility Guide
Option
ACPI Standby State
Restore on AC/Power
Loss
Resume On Ring
Resume On LAN (d228
and d230 models only)
Resume On PME
Computer Setup (F10) Utility
Description
Sets the ACPI Standby State when system
goes into ACPI Standby Mode.
• S1/POS: Power on Suspend
• S3/STR: Suspend to RAM (Default)
Sets the system status after AC power
loss.
• Power Off: System always Powers
Off (Default)
• Power On: System always Powers On
• Last State: System returns to the last
state before AC power loss
Sets the Resume On Ring from soft off.
• Disable: Ring Resume disable
(Default)
• Enable: Ring Resume enable
Sets the Resume On LAN from soft off.
• Disable: LAN Resume disable
• Enable: LAN Resume enable
(Default)
Sets the Resume On PME from soft off.
• Disable: PME Resume disable
• Enable: PME Resume enable
(Default)
7