Chapter Xv Appendix; Appendix A Accessories Of Utd2000 Series; Appendix B Maintenance And Cleaning; Appendix C Warranty - UNI-T UTD2052CL+ User Manual

Chapter XV
Appendix A Accessories
Model
Standard accessories
Optional accessories

Appendix B Maintenance and Cleaning

(1) General Maintenance
Please do not store or place the instrument at any places where the LCD of the instrument
is exposed to sunlight directly.
Caution: Please do not stain the instrument or probe with spray, liquid or solvent, so as to
avoid damaging the instrument or probe.
(2) Clearing
Check the instrument and probe frequently. Clean the surface of the instrument according
to the following steps:
① Please wipe the surface of the instrument and probe with soft cloth. Pay attention not
to scratch the LCD screen.
② Wipe the instrument with wet cloth after disconnecting the power supply. Use detergent
or clear water to clean. Do not use any abrasive chemical cleaning agent so as to avoid
damaging the instrument or probe.
Warnings: Please make sure that the instrument is completely dry before powering on again, to avoid
electrical short circuit or injury.

Appendix C Warranty

UNI-T (Uni-Trend Technology (China) Co., Ltd.) warrants that product produced and
marketed by it will be free from defects in materials and workmanship for a period of three
UTD2000 Series User Manual
Appendix
UTD2052CL+ (50 MHz)
UTD2072CL (70 MHz)
UTD2102CL+ (100 MHz)
UTD2102CL PRO (100 MHz)
UTD2152CL (150 MHz)
UTD2102CEX+ (100 MHz)
UTD2152CEX (150 MHz)
UTD2202 PRO(200 MHz)
UTD2202CEX+ (200 MHz)
A string of power cord complying with country standard.
A string of USB cable (UT-D14)
A pair of passive probe (50MHz) /(150MHz) /(200MHz)
Multimeter module (UT-M12)
64