Measurements And Adjustments; Adjustment - Panasonic TH-P42U30Z Service Manual

9 Measurements and Adjustments

9.1.

Adjustment

9.1.1. Vsus selection
Caution:
When Plasma panel or A-board is replaced, Vsus should be set to HIGH.
Procedure
1. Go into main item [VSUS] in Service Mode. HIGH will be displayed.
2. Press [OK] button to go to TEST stage.
White pattern without On-Screen Display will be displayed during TEST and CONF stage. Press [5] button to display the
On-Screen Display.
3. In HIGH setting
If no several dead pixel is visible remarkably in white pattern, press [3] button to go to CONF stage.
4. Press [OK] button in CONF stage to store HIGH.
5. Exit Service Mode by pressing [Power] button.
26