Panasonic TGB810S Operating Instructions Manual page 7

personal medical devices, such
as pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. (The product
operates in the frequency range
of 1.92 GHz to 1.93 GHz, and the
RF transmission power is 115 mW
(max.).)
● Do not use the product in health
care facilities if any regulations
posted in the area instruct you not
to do so. Hospitals or health care
facilities may be using equipment
that could be sensitive to external
RF energy.
CAUTION
Installation and location
● Never install telephone wiring
during an electrical storm.
● Never install telephone line jacks
in wet locations unless the jack is
specifically designed for wet
locations.
● Never touch uninsulated
telephone wires or terminals
unless the telephone line has
been disconnected at the
network interface.
● Use caution when installing or
modifying telephone lines.
● The AC adaptor is used as the
main disconnect device. Ensure
that the AC outlet is installed near
the product and is easily
accessible.
● The product is only use for
mounting at heights ≤ 2 m.
For assistance, please visit http://shop.panasonic.com/support
Important Information
Note:
● This height is not guaranteed
for product reliability.
● To prevent serious injuries due
to the product unexpectedly
falling, the product must be
installed at a height of 1.5 m
or lower.
● This product is unable to make
calls when:
– the handset batteries need
recharging or have failed.
– there is a power failure.
Battery
● We recommend using the
batteries noted on page 4.
USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
● Do not mix old and new batteries.
● Do not open or damage the
batteries. Released electrolyte
from the batteries is corrosive
and may cause burns or injury to
the eyes or skin. The electrolyte
is toxic and may be harmful if
swallowed.
● Exercise care when handling the
batteries. Do not allow conductive
materials such as rings, bracelets,
or keys to touch the batteries,
otherwise a short circuit may
cause the batteries and/or the
conductive material to overheat
and cause burns.
● Charge the batteries provided
with or identified for use with this
product only, in accordance with
the instructions and limitations
specified in this manual.
7