Fcc And Other Information - Panasonic TGB810S Operating Instructions Manual

Useful information
FCC and other
information
This equipment complies with
Part 68 of the FCC rules and the
requirements adopted by the ACTA.
On the bottom of this equipment is
a label that contains, among other
information, a product identifier in the
format US:ACJ----------.
If requested, this number must be
provided to the telephone company.
● Registration No.............(found on
the bottom of the unit)
● Ringer Equivalence No.
(REN) ..................................... 0.9A
A plug and jack used to connect this
equipment to the premises wiring
and telephone network must comply
with the applicable FCC Part 68
rules and requirements adopted by
the ACTA. A compliant telephone
cord and modular plug is provided
with the product. It is designed to be
connected to a compatible modular
jack that is also compliant.
The REN is used to determine
the number of devices that may
be connected to a telephone line.
Excessive RENs on a telephone
line may result in the devices not
ringing in response to an incoming
call. In most but not all areas, the
sum of RENs should not exceed
five (5.0). To be certain of the
number of devices that may be
connected to a line, as determined
by the total RENs, contact the local
telephone company. For products
34
For assistance, please visit http://shop.panasonic.com/support
approved after July 23, 2001, the
REN for the product is part of the
product identifier that has the format
US:AAAEQ##TXXXX. The digits
represented by ## are the REN
without a decimal point (e.g., 03 is a
REN of 0.3).
If this equipment causes harm to the
telephone network, the telephone
company will notify you in advance
that temporary discontinuance of
service may be required. But if
advance notice isn't practical, the
telephone company will notify the
customer as soon as possible. Also,
you will be advised of your right to
file a complaint with the FCC if you
believe it is necessary.
The telephone company may make
changes in its facilities, equipment,
operations or procedures that could
affect the operation of the equipment.
If this happens the telephone
company will provide advance
notice in order for you to make
necessary modifications to maintain
uninterrupted service.
If trouble is experienced with this
equipment, for repair or warranty
information, please contact a Factory
Service Center or other Authorized
Servicer. If the equipment is causing
harm to the telephone network, the
telephone company may request that
you disconnect the equipment until
the problem is resolved.
Connection to party line service is
subject to state tariffs. Contact the
state public utility commission, public
service commission or corporation
commission for information.