Symbols On The Product - Ryobi RPP182020 Original Instructions Manual

4. Harness hanger
5. Harness
6. Front hand grip
7. Trigger release
8. On/off trigger
9. Chain
10. Guide bar
11. Sprocket cover
12. Bar nut
13. Ribbed bumper
14. Chain tensioning screw

SYMBOLS ON THE PRODUCT

Safety alert
Read and understand all instructions.
Avoid using in wet or damp conditions.
Electrical hazard. Keep at least 10 m
10m
away from the overhead lines.
Beware of thrown or fl ying objects. Keep
all bystanders, especially children and
pets, at least 15 m from the operating
area.
Wear non-slip, heavy-duty protective
gloves when handling the pole saw and
the blade.
Wear slip-resistant footwear.
Wear eye, hearing, and head protection
when operating this equipment.
EurAsian Conformity Mark
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or
retailer for recycling advice.
CE Conformity
Ukranian mark of conformity
Moving direction of the chain (Marked
on the chain bar)
6
Lock
Unlock
V :5.5m/s No-load chain speed is 5.5m/s
0
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if
not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CAUTION
Without safety alert symbol
Indicates a situation that may result in property damage.
English