Ryobi RPP750S Original Instructions Manual
Hide thumbs
Also See for RPP750S:
- Original instructions manual (192 pages) ,
- Original instructions manual (209 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Ryobi RPP750S
Summary of Contents for Ryobi RPP750S
- Page 1 ORIGINAL INSTRUCTIONS Electric Pole Pruner RPP750S...
- Page 2 Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining this machine. Subject to technical modification.
-
Page 3: General Safety Warnings
PERSONAL SAFETY WARNING Stay alert, watch what you are doing and use When using the product, the safety rules must be common sense when operating a power tool. Do followed. For your own safety and that of bystanders, you not use a power tool while you are tired or under the must read and fully understand these instructions before influence of drugs, alcohol or medication. -
Page 4: Pruner Safety Warnings
less likely to bind and are easier to control. the tool in unexpected situations. Use the power tool, accessories and tool bits etc, Only use a weather proof extension cord. Check the in accordance with these instructions, taking into extension cord before every use for damage. Always account the working conditions and the work to uncoil the extension cord during use because coiled be performed. - Page 5 Ensure that a safety zone at least twice one, available from your authorised Ryobi service the length of the branch to be cut is available and centre. The part number is available in the product maintained during your pruning.
-
Page 6: Transportation And Storage
Daily check to prevent rust. The manufacturer recommends the use of Ryobi bar and chain lubricant which is available from Power cable for damage Before each use your Ryobi authorised service centre. -
Page 7: Residual Risks
7. Trigger release RESIDUAL RISKS Even when the product is used as prescribed, it is still 9. Cord retainer impossible to completely eliminate certain residual risk 10. Chain factors. The following hazards may arise in use and the 11. Guide bar operator should pay special attention to avoid the following: 12. -
Page 8: Symbols In This Manual
Unlock SYMBOLS IN THIS MANUAL Connect to power outlet. Disconnect from power outlet. Parts or accessories sold separately Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Note Warning Wear eye and face protection. The following signal words and meanings are intended to explain the levels of risk associated with this product. - Page 10 10 11...
- Page 14 3-4 mm p.12 p.14 p.15 p.17 p.18...
- Page 15 (50’)
- Page 17 3-4 mm 3-4 mm...
- Page 19 3-4 mm...
-
Page 22: Product Specifications
PRODUCT SPECIFICATIONS VIBRATION LEVEL The declared vibration value has been measured with a Model RPP750S standard test method and may be used to compare one tool with another. Rated power 750W The declared vibration value may be used in a preliminary... - Page 23 Imported by: Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 18-26 Amelia Earhart Avenue Mangere, Auckland 2022, New Zealand...