Residual Risks; Risk Reduction; Know Your Product; Symbols On The Product - Ryobi RPP750S Original Instructions Manual

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
time and exposure.
protection and limit exposure.
Contact with exposed saw teeth of the chain (cutting
hazards).
Unforeseen, abrupt movement or kickback of the guide
bar (cutting hazards).
hazards).
Thrown out pieces of the work piece (wood chips,
splinters)
Inhalation of saw dust and particles.

RISK REDUCTION

It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices
are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
Keep your body warm in cold weather. When operating
the unit wear gloves to keep the hands and wrists
contributing to Raynaud's Syndrome.
After each period of operation, exercise to increase
blood circulation.
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.

KNOW YOUR PRODUCT

See page 8.
1. Chain lubricant cap
2. Extension pole
3. Shaft coupling
4. Harness hanger
5. Harness
6. Front hand grip
WARNING
7. Trigger release
8.
9. Cord retainer
10. Chain
11. Guide bar
12. Sprocket cover
13. Bar nut
14. Ribbed bumper
15.

SYMBOLS ON THE PRODUCT

Safety alert
Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Wear eye, ear and head protection.
Wear non-slip safety footwear when
using the product.
Wear non-slip, heavy duty gloves.
Do not expose to rain or damp
condition.
Electrical hazard, at least 10 m away
10m
from the overhead electric-power lines
Remove plug from the mains
immediately before maintenance or if
cable is damaged or cut
Keep all bystanders, especially children
and pets, at least 15 m away from the
operating area
Class II tool, double insulation
Regulatory Compliance Mark (RCM).
Product meets applicable regulatory
requirements.
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or
retailer for recycling advice.
Moving direction of the chain
(Marked under the sprocket cover)
Lock
5