HP Blade dc72 Reference Manual page 94
Business pc 1st edition
Hide thumbs
Also See for Blade dc72:
- Hardware reference manual (60 pages) ,
- User manual (42 pages) ,
- Setup and configuration manual (30 pages)
Table of Contents
Advertisement
Removal and Replacement Procedures - Convertible Minitower (CMT) Chassis
9. After installing the M3 metric guide screws 1, install the drive by sliding it into the
appropriate drive bay on the front of the chassis 2. The drivelock automatically secures the
drive in the bay.
Ä
CAUTION: Make sure the guide screws line up with the guide slots in the drive cage. The use of
unnecessary force when installing any drive into the drive bay may result in damage to the drive.
10. When installing an optical drive, the default audio solution is digital audio. No separate
audio cable is required for Windows XP applications.
11. Connect the data and power cables on the to the drive.
✎
Refer to
Chapter 4, "Serial and Parallel ATA Drive Guidelines and Features"
attaching the cabling to get optimum performance.
12. Replace the front bezel
13. Replace the computer access panel
14. If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and
enable the Smart Cover Sensor
6–24
(Section
6.6).
(Section
6.5)
(Section
6.2).
433612-001
for information on
Service Reference Guide, dc7700
Advertisement
Table of Contents
