HP Blade dc72 Reference Manual page 24

Setup Utilities and Diagnostics Features
Heading Option
Advanced* Power-On Options
(continued) (continued)
*For
advanced
users only
Execute Memory
Test (some models)
BIOS Power-On
Onboard Devices
PCI Devices
PCI VGA
Configuration
✎
Support for specific Computer Setup options may vary depending on the hardware configuration.
2–12
Allows you to set: (continued)
• I/O APIC Mode (enable/disable). Enabling this feature will
allow Microsoft Windows Operating Systems to run optimally.
This feature must be disabled for certain non-Microsoft
Operating Systems to work properly.
• Hyper-threading (enable/disable)
• Limit CPUID Maximum Value to 3 - Restricts the number of
CPUID functions reported by the microprocessor. Enable this
feature if booting to WinNT.
Restarts the computer and executes the POST memory test.
Allows you to set the computer to turn on automatically at a time you
specify.
Allows you to set resources for or disable onboard system devices
(diskette controller, serial port, or parallel port).
• Lists currently installed PCI devices and their IRQ settings.
• Allows you to reconfigure IRQ settings for these devices or to
disable them entirely. These settings have no effect under an
APIC-based operating system.
Displayed only if there are multiple PCI video adapters in the
system. Allows you to specify which VGA controller will be the
"boot" or primary VGA controller.
✎
In order to see this entry, you must enable integrated video
(Advanced > Device Options) and Save Changes and
Exit.
433612-001
Description
Service Reference Guide, dc7700