HP Blade dc72 Reference Manual page 84

Removal and Replacement Procedures - Convertible Minitower (CMT) Chassis
7. If you are removing a PCI Express card from a x16 PCI Express socket with a retention
mechanism, pull the retention arm away from the socket then carefully rock the card back
and forth until the connectors pull free from the socket. Lift the expansion card straight up
then pull it in toward the center of the chassis to release it from the chassis frame. Be sure not
to scrape the card against other components.
8. Store the removed card in anti-static packaging.
9. If you are not installing a new expansion card, install an expansion slot cover to close the
open slot and continue with step 12.
If you are installing a new expansion card, continue with step 11.
CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot
Ä
cover for proper cooling of internal components during operation.
6–14 433612-001 Service Reference Guide, dc7700