HP b2600 Reference Manual page 123

GL_MAP_STENCIL is true, the index is replaced with the value that it references in
lookup table GL_PIXEL_MAP_S_TO_S. Whether the lookup replacement of the index is
done or not, the integer part of the index is then ANDed with 2
number of bits in the stencil buffer. The resulting stencil indices are then written to the
stencil buffer such that the nth index is written to location
x
n
y
n
where (x
test, and the stencil writemask affect these write operations.
GL_DEPTH_COMPONENT
Each pixel is a single-depth component. Floating-point data is converted directly to an
internal floating-point format with unspecified precision. Signed integer data is mapped
linearly to the internal floating-point format such that the most positive representable
integer value maps to 1.0, and the most negative representable value maps to 1.0.
Unsigned integer data is mapped similarly: the largest integer value maps to 1.0, and 0
maps to 0.0. The resulting floating-point depth value is then multiplied by
GL_DEPTH_SCALE and added to GL_DEPTH_BIAS. The result is clamped to the range
[0, 1].
The GL then converts the resulting depth components to fragments by attaching the
current raster position color or color index and texture coordinates to each pixel, then
assigning x and y window coordinates to the nth fragment such that
x
n
y
n
where (x
like the fragments generated by rasterizing points, lines, or polygons. Texture mapping,
fog, and all the fragment operations are applied before the fragments are written to the
frame buffer.
GL_RGBA
Each pixel is a four-component group: for GL_RGBA, the red component is first, followed
by green, followed by blue, followed by alpha. Floating-point values are converted
directly to an internal floating-point format with unspecified precision. Signed integer
values are mapped linearly to the internal floating-point format such that the most
positive representable integer value maps to 1.0, and the most negative representable
value maps to 1.0. (Note that this mapping does not convert 0 precisely to 0.0.) Unsigned
integer data is mapped similarly: the largest integer value maps to 1.0, and 0 maps to
0.0. The resulting floating-point color values are then multiplied by GL_c_SCALE and
added to GL_c_BIAS, where c is RED, GREEN, BLUE, and ALPHA for the respective
color components. The results are clamped to the range [0, 1].
If GL_MAP_COLOR is true, each color component is scaled by the size of lookup table
GL_PIXEL_MAP_c_TO_c, then replaced by the value that it references in that table. c is
R, G, B, or A respectively.
The GL then converts the resulting RGBA colors to fragments by attaching the current
raster position Z coordinate and texture coordinates to each pixel, then assigning x and y
window coordinates to the nth fragment such that
x
n
Chapter 4
= x + n mod width
r
= y + n/width
r
, y ) is the current raster position. Only the pixel ownership test, the scissor
r r
= x + n mod width
r
= y + n/width
r
, y ) is the current raster position. These pixel fragments are then treated just
r r
= x + n mod width
r
glDrawPixels
b
- 1, where b is the
123
D