Viking VK1202 Technical Data Manual page 3

Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com
Visit the Viking website for the latest edition of this technical data page www.vikinggroupinc.com
Thread Size
Sprinkler Base
NPT
Part Number
1
Inch
22102 1/2
22108 --
A = 135 °F (57 °C), 155 °F (68 °C), 175 °F (79 °C), 200 °F (93 °C) and 286 °F (141 °C)
1 = Brass, Chrome, White Polyester
Base Part number is shown. For complete part number, refer to Viking's current price schedule.
1
2 This table shows the listings and approvals available at the time of printing. Check with the manufacturer for any additional approvals.
Other colors are available upon request with the same Listings and Approvals as the standard colors.
3
cULus Listed as corrosion resistant.
4
5 LPCB approved; reference no. 096m
cULus Listing Requirements:
The Viking Standard Response Conventional Sprinkler VK1202 is cULus Listed as indicated in the Approval Chart for installation in
accordance with the latest edition of NFPA 13 for old style (conventional) sprinklers.
• Designed for use in Light, Ordinary, and Extra Hazard occupancies.
• The sprinkler installation rules contained in NFPA 13 for standard spray old style (conventional) sprinklers must be followed.
IMPORTANT: Always refer to Bulletin Form No. F_091699 - Care and Handling of Sprinklers. Also refer to Form No. F_080614
for general care, installation, and maintenance information. Viking sprinklers are to be installed in accordance with the latest
edition of Viking technical data, the appropriate standards of NFPA, LPCB, or other similar organizations, and also with the
provisions of governmental codes, ordinances, and standards, whenever applicable.
1. Slide the wrench around the protective cap.
2. Press the wrench downward to engage on the wrench flats.
3. Rotate the wrench clockwise to install the sprinkler.

NOTE: The sprinkler frame arms shall be parallel to the pipe.
Form No. F_102718 Rev 22.1
The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058
Standard Response Conventional Sprinkler
VK1202 K8.0 (115 metric)
Maximum 175 PSI (12 bar) WWP
BSPT
mm
--
15
Approved Temperature Ratings
, Black Polyester
3,4
DESIGN CRITERIA - UL
1
2
March 3, 2022
TECHNICAL DATA
APPROVAL CHART
Listings and Approvals
UL
Approval Specification
A1
A1
Approved Finishes
, and ENT
3,4 4
Footnotes
Figure 3: Installation
VK1202 STANDARD
RESPONSE CONVENTIONAL
SPRINKLER (K8.0)
2
Approval Specification
3
Frame arms
parallel to
the pipe.
Replaces Form No. F_102718 Rev 20.1
Page 3 of 3
LPCB
5
A1
A1
(Added LPCB details, removed CE.)