Smeg SI1M4844D Manual page 13

Cooking zones display
The buttons for selecting the cooking zones
and the timer icons above each of them
and the Warming function icon are found in
this zone.
Timer display
The controls for setting the independent
timer and the timer for the cooking zones
are located in this area. The following text is
displayed when it is possible to set an
independent timer
Pan diameters
Make sure that the minimum diameter of the
pans is that indicated in the following table:
Zone
minimum (cm)
Zone 1 and 2
9 - 11*
(single zone)
Zone 1 and 2
(Multizone)
Zone 3
Zone 4 9 - 11*
Zone 5 7 - 9*
Zone 6
.
Ø
Ø
recommended
(cm)
18
19 22
13 25
21
20
11 16
Use
* When using a pan with diameters smaller than
the smallest diameter shown in the "Ø minimum
(cm)" column, it may not be detected.
Bear in mind the following:
• Do not exceed the limits of the zones
printed on the hob.
• Do not cover the control panel.
• Do not place the pans next to the edges
of the glass.
• If you intend to use a griddle or a long
pan in zones 1 and 2 in Multizone
mode, it is recommended to use one with
a maximum size of 22 x 36 cm and a
minimum size of 19 x 19 cm.
Cookware suitable for use in induction
cooking
Cookware used on the induction cooking
surface must be made of metal, with
magnetic properties and a sufficiently large
base.
Suitable cookware:
• Enamelled steel cookware with thick
bases.
• Cast iron cookware with an enamelled
base.
• Cookware in multilayer stainless steel,
ferritic stainless steel and aluminium with
a special base.
Unsuitable cookware:
• Copper, stainless steel, aluminium,
fireproof glass, wood, ceramic and
53