Bootrom Upgrade Via Tftp; Bootrom Upgrade Via Ftp - 3Com ProCurve E4500-48 Getting Started Manual

Switch 4500 family
Table of Contents

Advertisement

Bootrom Upgrade
via TFTP
Bootrom Upgrade
via FTP
To upgrade the bootrom firmware from the Boot menu via TFTP do the
following:
1 From the Boot menu, select option 6 to display the bootrom upgrade
menu as shown:
Bootrom update menu:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):
2 Select option 1 to display the following:
Load File name:
Switch IP address:
Server IP address:
3 Enter the file name, Switch IP address and Server IP address to display the
following:
Are you sure to update your bootrom? Yes or No(Y/N)
4 Enter y and the following information is displayed to indicate the file is
downloading:
Attached TCP/IP interface to netdrv0
Attaching network interface Io0...done
Loading.................................
...............done
Bootrom updating............done!
To upgrade the bootrom firmware from the Boot menu via FTP do the
following:
1 From the Boot menu, select option 6 to display the bootrom upgrade
menu as shown:
Bootrom update menu:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):
2 Select option 2 to display the following:
Bootrom Upgrade
83

Advertisement

Table of Contents
loading

This manual is also suitable for:

4500 26-port4500 50-portSwitch 4500 pwr 26-port

Table of Contents