Introduction
This guide describes how to install the following devices:
•
HP ProCurve Routing Switch 9315M
•
HP ProCurve Routing Switch 9308M
•
HP ProCurve Routing Switch 9304M
For configuration and other information, refer to the Installation and Getting Started Guide and other guides
provided on the Documentation CD-ROM for release 7.5.X or greater, shipped with your HP routing switch chassis
or management module. (For the latest version of routing switch documentation, visit:
Click on technical support, then manuals.
Audience
This guide assumes that you have a working knowledge of network hardware installation.
Nomenclature
This guide uses the following typographical conventions:
Italic
highlights the title of another publication and occasionally emphasizes a word or phrase.
Bold
highlights a CLI command.
Bold Italic
highlights a term that is being defined.
Underline
highlights a link on the Web management interface.
Capitals
highlights field names and buttons that appear in the Web management interface.
NOTE: A note emphasizes an important fact or calls your attention to a dependency.
WARNING: A warning calls your attention to a possible hazard that can cause injury or death.
CAUTION:
A caution calls your attention to a possible hazard that can damage equipment.
http://www.hp.com/go/hpprocurve
Getting Started
1
1 - 1