Settings; Introduction; Setting Menu Language - A.O. Smith 28 30 50 60 Installation & Service Manual

gis
ON SU 08:15
OFF SU 12:45
Tset»65ÉC
PUMP ON SAVE
Figure 8.34 Setting water
temperature for extra period
ON SU 08:15
OFF SU 12:45
Tset 75ÉC
PUMP»ON START
Figure 8.35 Pump setting for
extra period
ON ZO 08:15
OFF ZO 12:45
Tset 75ÉC
PUMP ON »START
Figure 8.36 Saving extra period
8.7

Settings

8.7.1
8.7.2
MENU
WEEK PROGRAM
^ EXTRA PERIOD
ȻSETTINGS
Figure 8.37 Settings
SETTINGS
»LANGUAGE
^ DAY/TIME
È SPECIFICATIONS
Figure 8.38 Language
Release R.1.3 UK
The cursor moves to the water temperature. See
Setting the water temperature
7. Use H and L to select the water temperature. In the example this is 75.
Confirm with E.
The cursor moves to
PUMP ON
Setting program-controlled pump
8. If required, a pump can be controlled during the period. Use H and L to
select . The pump ensures a regular circulation of hot water in the
PUMP ON
hot water pipes. You can skip this step if you there is no pump in your hot
water circuit.
Confirm with E.
The cursor moves to
START
9. Confirm with E.
The extra period has been programmed.
n
Remark
Once the extra period has completed running, the controller returns to the
mode ON, OFF or WEEK PROGRAM. The following week, the extra period
will NOT be automatically switched on.

Introduction

Using the option
SETTINGS
appliance specifications. See
Table 8.1 Adjustable settings and displayable appliance specifications
Adjustable settings
Displayable appliance
specifications
This category is only relevant to
the installer and/or service and
maintenance engineer.

Setting menu language

Bring up the menu for selecting the language via:
1. B: .
SETTINGS
Confirm with E.
The display shows the menu for settings. See
2. The cursor is positioned beside
Confirm with E.
The display shows the language selection menu. See
Figure
. See Figure 8.35.
. See Figure 8.36.
you can adjust certain settings, and display certain
Table 8.1.
Menu language
!
Current day of week, and time
!
Regulation interval (water
!
temperature).
Ignition speed of fan.
!
Running speed of fan.
!
Figure
LANGUAGE
Settings
8.34.
8.38.
Figure 8.39.
61