gis
gis
5
5.1
Introduction
5.2
Operating
^»START OPERATION
È CHANGE SETPOINT
Tset=70ÉC
Figure 5.2 The display
Release R.1.3 UK
The control panel
Topics covered in this chapter:
•
5.2
Operating;
•
5.3 Explanation of the
icons;
•
5.4 ON/OFF switch of
ThermoControl;
•
5.5 Navigation
buttons;
•
5.6 PC
connection..
Figure 5.1
shows the ThermoControl. The control panel is completely menu-
driven. It comprises:
•
a 4-line display with 20 characters per line;
•
6 push buttons for operating the appliance (below the display);
•
6 graphical symbols (above the display);
•
a connector for a service PC;
•
an ON/OFF switch.
The push buttons are divided into three groups:
•
Navigation buttons:
-
Buttons UP H, and DOWN L;
-
Enter: E;
-
Reset button: R
•
The main menu: B (see chapter
•
the service program: S (see chapter
specifically intended for the service and maintenance engineer and
installer).
MENU
»OFF
^ ON
» WEEK PROGRAM
Figure 5.1 ThermoControl
In this manual, the display of the ThermoControl is shown as in
with and without icons.
'8 Main
menu');
'9 Service
program', this chapter is
Figure
Introduction
5.2, both
43